Floral Heart SVG With Flowers - Intricate Cuts Made Easy! (2024)

Materials

• 6 Sheets of 65-80 lb. cardstock -- I used Cricut Cardstock Sampler 80 lb, Red Tones - 12" x 12" pack (one of each color)
• 1 Sheet 12" x 12" 80 lb White Cardstock
• 1 Each 12" x 12" Shadow Box Frame
• Design #470 (My free SVG/PDF/DXF design files available in my free resource library - get the password by filling out the form at the bottom of this page)

Tools

• A method to cut your cardstock: I used the amazing Cricut Maker 3, but you can also use the Cricut Maker, or Cricut Explore Series
• Fine-Point Blade
• Deep-Point Blade - useful if the Fine Point Blade is tearing textured or thick cardstock
• Cricut Green StandardGrip Mat (12″ x 12″)
• Brayer Tool
• Spatula
• Weeding Tool
• Scraper
• Scissors -OR-
• Cricut TrueControl Knife -AND-
• Cricut Self Healing Cutting Mat
• Bearly Art Foam Squares -OR-
• Bearly Art Glue
• Ruler

Instructions

STEP 1: GET MY FREE FLORAL HEART FILE

First, download my Floral Heart SVG/PDF/DXF files from my free resource library. It's Design #470.

Each file includes all seven pieces that make this beautiful, layered design.

Upload the SVG to Design Space. To do so, click “Upload” on the bottom left of the menu next to your Canvas, then click “Upload Image.”

Tip: If you're not sure how to upload an SVG cut file to Cricut Design Space, watch this helpful video training series I made. If you're on an iPhone or iPad, here's how to download and upload SVG files to the Cricut Design Space app.

To add the Floral Heart to your Canvas, select the image in the preview area, then select "Add to Canvas."

You can zoom out to see the design by clicking on the minus (-) sign on the lower left.

STEP 2: PREPARE YOUR DESIGN FILES

This is what my Floral Heart SVG file looks like when uploaded to Cricut Design Space.

The design is set up to make one Floral Heart approximately 11.5” wide by 8.73” tall.

Before clicking “Make It,” be sure this size will fit inside your frame or in the space where you intend to display your finished Floral Heart.

Since I'm using a shadow box frame, I need to measure the space inside the frame to see how much room my Floral Heart will have.

Use a ruler or measuring tape to measure from inside one edge of the frame to inside the other edge.

I do not recommend adjusting this design to a smaller size due to the intricate cuts required to produce the offset appearance inside the layers. If the design is too big for your chosen frame or display area, I recommend selecting a different frame or a different piece of art for your project.

If you decide to change the size, be sure to select all the layers and type in the new measurement for the width in the size box at the top of the Canvas while making sure the lock icon is closed.

Once the Floral Heart is the right size, it is ready to cut!

STEP 3: CUT THE HEART LAYERS

Check that the right machine is listed in the top corner, then click "Make It!"

If you are prompted about how you will load your materials, select "On Mat" and 12" x 12". Then click the green Confirm button.

Your design will appear on seven different mats that are marked with the color of each layer.

Make sure the correct Material Size is selected for each mat. This design is large so it needs 12” x 12” cardstock.

Leave “Mirror” turned off and click “Continue”

On the “Make” screen, select the cutting settings for each mat. Sometimes, papers of the same weight have different textures and need slightly different settings or tools. I used 80 lb cardstock to make my Floral Heart to give it more structure, but the white and colored, textured papers cut differently.

For the smooth white layer, I used “Medium Cardstock – 80 lb.” with “More Pressure" and a Fine-Point Blade.

I did notice with the slightly textured cardstock that I used for the colored layers, the Fine-Point Blade tended to tear the material, rather than cut it.

The Deep-Point Blade cuts at a different angle than the Fine-Point Blade. This can make a difference when trying to cut thick or textured cardstock because of how the angle of the blade interacts with the fibers of the paper.

So, for the textured paper, I did not change the tool settings that are preselected with "Medium Cardstock - 80 lb" but I did switch the blade in the housing from the Fine-Point Blade to the Deep-Point Blade.

I also changed the pressure to “Less Pressure” to accommodate the slightly different cutting angle.

This combination of blade and settings provided a much smoother cut.

Every machine is different, so you may need to test settings before finding one that works correctly for you.

TIP: If you run into any issues cutting your materials, check out my .

Place the cardstock on your green StandardGrip mat and make sure it has adhered well by pressing it with your brayer.

The mats will cut in layer order from light to dark as long as colors in the file have not been changed.

TIP: If you want more information on how Design Space orders cutting mats, read my article Cricut Mat Order: How Do I cut My Cricut In Order.

Load the mat into your Cricut and press the flashing button to begin.

Once the cutting is complete, and before unloading your mat, check to see if the cut went all the way through. If not, press Start for another pass.

Remove the cut pieces from the mat by turning the mat over and rolling it away from the cardstock. Move slowly and use a spatula to carefully remove the intricate cuts from the mat.

A weeding tool may be useful to poke out little pieces of cardstock that do not remain behind on the mat after the cut piece is removed.

Continue to print, load, cut, and remove mats until all the pieces are cut.

STEP 4: ASSEMBLE THE HEART MANDALA

The Floral Heart design consists of seven layers. Gather your cut pieces and foam adhesive. (Alternatively, you can use craft glue if you wish your complete Floral Heart to be less dimensional, but the steps will be the same - just substitute glue where I say foam adhesive!)

Stack the layers in the correct order from bottom up. The solid piece will be the bottom and each layer up will have more cuts. The top layer will be the most intricately cut piece.

To make sure the layers are ordered correctly, remove the top layer and look inside the center of the sunflower. You will be able to see six layers all moving in to the center.

Replace the top layer. Now you have seven layers all stacked and ready to adhere to each other.

Flip the stack over so you can see the solid back.

To adhere the layers to each other, we'll flip one layer back over at time.

Start by placing the solid back layer directly on the table and right side up.

Place the foam adhesive squares on the back of the sixth layer.

Flip layer six right side up and press on to the top of layer seven. Look straight down onto the stack to align the edges of the layers. If you look at it from an angle, it is much more difficult to line them up correctly.

Continue with each layer in the same manner, always adding the adhesive to the back of the next layer up.

Add adhesive to the back of layer five.

Flip and place layer five on top of layer six.

Add adhesive to the back of layer four.

Flip and place layer four on top of layer five.

Add adhesive to the back of layer three.

Flip and place layer three on top of layer four.

Add adhesive to layer two.

Flip and place layer two on top of layer three.

For layer one, you will find it necessary to cut the adhesive foam squares using a craft knife and cutting mat or craft scissors to make very thin strips so the foam adhesive does not show.

Flip, align and place layer one on top of layer two.

The Floral Heart is now complete and ready to add to your frame or display. I placed my Floral Heart inside a shadow box, so I used the same adhesive foam squares and added them to the back of the heart.

Note: Be really generous with the adhesive to make sure the heart doesn’t slide around inside the frame after it hangs for a while!

Adhere the Floral Heart to the frame backer and place it inside the frame.

And this is what my finished Floral Heart looks like framed.

STEP 5: Show it Off

The Floral Heart is great for displaying and can make a wonderful gift. You can even add vinyl text to the glass to personalize it! (Check out this Paper Flower Shadow Box tutorial to see how.)

Notes